Wi-Fi 6 vs 6E: Same Protocol, More Room

Wi-Fi 6E is Wi-Fi 6 with a third band. The FCC opened 1,200 MHz of 6 GHz spectrum on April 23, 2020, and 6E is what the Wi-Fi Alliance calls devices that use it. You get more and wider channels with no old devices on them, and you give up a little range.

Tech Talk News Editorial7 min read
#networking#home networking#internet#wifi#wi-fi 6e
ShareXLinkedInRedditEmail
Wi-Fi 6 vs 6E: Same Protocol, More Room

Key takeaways

  • Wi-Fi 6E is Wi-Fi 6 extended into the 6 GHz band: the Wi-Fi Alliance says it delivers all the benefits of Wi-Fi CERTIFIED 6, plus wider channels, so the protocol and its features are the same.
  • On April 23, 2020 the FCC opened 1,200 megahertz of spectrum (5.925 to 7.125 GHz) for unlicensed use, and the Wi-Fi Alliance began certifying Wi-Fi 6E devices on January 7, 2021.
  • The Wi-Fi Alliance's channel table lists 59 channels of 20 MHz, 14 of 80 MHz and 7 of 160 MHz in 6 GHz, against 25, 6 and 2 in 5 GHz, and 160 MHz channels are what unlock Wi-Fi 6's top rate of 9 Gbps.
  • The 6 GHz band carries only Wi-Fi 6 and later devices, so a 6E network is free of traffic from legacy devices, but Excentis measured slightly lower coverage at 6 GHz than at 5 GHz in a test house.
  • A 6E router only helps devices that have a 6 GHz radio; in the Excentis test one of two client devices could not see the 6 GHz network at all.

Wi-Fi 6E is Wi-Fi 6 with a third band. The “E” means extended into 6 GHz, a stretch of 1,200 megahertz (MHz) that the Federal Communications Commission (FCC) opened for unlicensed use on April 23, 2020.[1]

The protocol and its features are the same. What you get is more channels, wider channels and no old devices on them. What you give up is a little range.

That is the answer to the question most people ask, which is whether 6E is faster. It is faster when you are close to the router, your device has a 6 GHz radio, and the 5 GHz band around you is crowded. Take away any of the three and a plain Wi-Fi 6 router is the better deal.

6E is a band, not a faster protocol

Start with the naming, because the naming is why this is confusing. When the FCC voted, its own press release said the new rules “will usher in Wi-Fi 6, the next generation of Wi-Fi.”[1] It did not say 6E.

The Wi-Fi Alliance, the industry group that certifies Wi-Fi gear, later added the E as a label for Wi-Fi 6 devices that use the new band, and its own Wi-Fi 6 page now says Wi-Fi 6 “also introduced Wi-Fi in the 6 GHz band.”[3]

So the line between 6 and 6E is a retail label, and the Alliance says it plainly: Wi-Fi 6E “delivers all the benefits of Wi-Fi CERTIFIED 6, plus” wider channels.[4]

Those benefits are the same list in both. Orthogonal frequency division multiple access (OFDMA) lets a router share one channel among several devices. Target wake time (TWT) lets devices schedule when they wake up, which saves battery.

Multi-user multiple input, multiple output (MU-MIMO) lets the router talk to more than one device at once, and 1024-QAM packs more data into each signal.[3] The Alliance announced 6E certification on January 7, 2021, describing it as extending exactly those features into the new band.[2]

What the E adds

Wi-Fi 6E keeps the Wi-Fi 6 feature set and adds a third band.

Same in both

  • OFDMAShares a channel among several devices
  • Target wake timeSchedules device sleep to save battery
  • MU-MIMOServes several devices at once
  • 1024-QAMPacks more data per signal

Wi-Fi 6E

Wi-Fi 6 plus the 6 GHz band

What the E adds

  • 1,200 MHz of new spectrum5.925 to 7.125 GHz
  • Up to seven 160 MHz channels
  • A band with no legacy devices on it
Same as Wi-Fi 6The protocol itselfThe Wi-Fi 6 top rate of 9 Gbps applies to both. 6E does not raise it.

The top rate is a ceiling that needs 160 MHz channels. 6E makes those channels easier to get.

The gain is lanes, and the numbers are lopsided

Here is where 6E earns its extra letter. The Alliance publishes a channel table that compares what each band can fit.

In 5 GHz it lists 25 channels of 20 MHz, 6 of 80 MHz and 2 of 160 MHz, and only 9, 2 and 0 of those are free of dynamic frequency selection (DFS) limits, the radar-avoidance rules that can force a router to hop channels.

In 6 GHz it lists 59, 14 and 7, with no such footnote.[4] A 160 MHz channel matters because the Alliance ties the top Wi-Fi 6 rate of 9 Gbps to it.[4]

5 GHz (Wi-Fi 6)

6 GHz (Wi-Fi 6E)

  1. Channels of 20 MHz
    25
    59
  2. Channels of 80 MHz
    6
    14
  3. Channels of 160 MHz
    2
    7
Channel counts are the Wi-Fi Alliance's own table. Availability varies by country, and 5 GHz counts include channels subject to DFS.
Wide channels are scarce in 5 GHz and plentiful in 6 GHz.

Takeaway

6E does not make the protocol faster. It makes a wide channel easy to find, and a wide channel is the thing Wi-Fi 6 needs to reach its top speed.

The FCC counts the same gain differently. Its press release says the move increases “the amount of spectrum available for Wi-Fi by nearly a factor of five,”[1] and the Alliance's own deck calls it a 3X increase over the combined 2.4 and 5 GHz bands.[4]

The two multipliers differ and neither source shows its denominator, so I would not argue over them. Either way, the road got a lot wider.

1,200 MHz
FCC, April 23, 2020
New unlicensed spectrum in 6 GHz
59
vs 25 in 5 GHz
Channels of 20 MHz in 6 GHz
7
vs 2 in 5 GHz
Channels of 160 MHz in 6 GHz
9 Gbps
Needs 160 MHz
Wi-Fi 6 top rate, in both bands

No legacy devices means a cleaner channel

The second gain is quieter. The Alliance's table lists which standards each band supports: 2.4 GHz carries Wi-Fi 6 down to the oldest 802.11b gear, 5 GHz carries Wi-Fi 6 back to 802.11a, and 6 GHz carries Wi-Fi 6 only.[4]

The same deck says that frees Wi-Fi 6E networks “from overhead and traffic from legacy devices, enabling a higher baseline performance.”[4] That is an industry group describing its own product, so read it as a claim.

It matches how the technology works, though. A band where every device speaks the newest dialect doesn't have to slow down to accommodate an old laptop.

My read is that this is the bigger deal in a building full of neighbors' routers, and the smaller one in a house on a quiet lot.

Nobody has published the number that would settle it, and the one independent test I found didn't try. Excentis, a broadband testing lab, said outright that the main benefit of 6E, congestion avoidance, was not tested.[5]

“6E is the empty road. Whether it helps depends on whether you own a car that can drive on it.”

The price is range, and the rules cap the power

Higher frequencies lose more signal over distance, and 6 GHz is no exception. Excentis put a Wi-Fi 6E access point in its test house, measured at 8 positions upstairs and down, and used 160 MHz channels on both 5 GHz and 6 GHz.

The result was that 6 GHz coverage was slightly lower than 5 GHz. Its conclusion: the clean spectrum and the absence of legacy devices outweigh that drawback.[5] I agree with that trade, for a device in the same room or the next one.

The FCC's rules add a second limit. Its 2020 order authorizes indoor low-power operation over the full 1,200 MHz, and standard-power devices in only 850 MHz of it, under an automated frequency coordination (AFC) system that keeps them away from licensed users.[1]

A home router is the low-power kind. Standard-power operation could only begin after February 23, 2024, when the FCC approved seven AFC systems from Qualcomm, Federated Wireless, Sony, Comsearch, the Wi-Fi Alliance, the Wireless Broadband Alliance and Broadcom.[6]

How 6 GHz Wi-Fi got to your router

Four years from a vote to standard power

  1. Apr 23, 20201,200 MHz

    FCC opens 6 GHz to unlicensed use

    The Commission adopts rules for 5.925 to 7.125 GHz. Indoor low-power devices get the full band, and standard-power devices get 850 MHz under AFC control.[1]

  2. Jan 7, 2021

    Wi-Fi Alliance starts certifying Wi-Fi 6E

    Wi-Fi CERTIFIED 6 extends to 6 GHz, with up to seven 160 MHz channels and WPA3 (Wi-Fi Protected Access 3) security.[2]

  3. Feb 23, 20247 systems

    FCC approves seven AFC systems

    The approvals are, in the FCC's words, critical to allowing standard power Wi-Fi to begin operating in the 6 GHz band.[6]

Takeaway

The band you can use at home was open from the first day. The part that took four years is the higher-power version.

Your devices decide whether you benefit

A 6E router has three networks, and only devices with a 6 GHz radio can join the third. The Alliance says its 6E certification uses WPA3 security,[2] so a device that cannot do WPA3 stays on the other two.

In the Excentis test, one of the two client devices could not even see the 6 GHz network name.[5] That is a lab with a hand-picked pair of clients, and it is still the most honest picture of the situation: a 6E router and a drawer full of older gadgets gives the gadgets nothing new.

Check your own phone and laptop before you decide. The speed they report depends on the link rate they negotiated, and our post on why a phone out-tests a laptop shows how to look it up. Then compare the two options side by side.

FeatureWi-Fi 6Wi-Fi 6E
Bands2.4 GHz and 5 GHz2.4 GHz, 5 GHz and 6 GHz
FeaturesOFDMA, TWT, MU-MIMO, 1024-QAMThe same, extended into 6 GHz
160 MHz channels2 in 5 GHz7 in 6 GHz
Old devices on the bandYes, on 2.4 GHz and 5 GHzNone in 6 GHz
RangeBetter at 5 GHzSlightly lower at 6 GHz

Heads up

Wi-Fi 7 also uses the 6 GHz band. The Alliance says its “320 MHz channels available in the 6 GHz band provide twice the throughput of Wi-Fi 6.”[3] If a Wi-Fi 7 router costs about what a 6E one does, compare those two and skip plain Wi-Fi 6. Your devices still decide what you can use.

Buy 6E if you are close, current and crowded, and fix the wiring first

Here is my rule. Buy 6E when your main devices have 6 GHz radios, they sit near the router, and your 5 GHz band is busy.

Buy Wi-Fi 6 when your devices are older or your house is big, and spend the difference on placement or a second node. If the weak spot is a far bedroom, no band solves it, and our guide to extenders, boosters and mesh covers what does.

And if one device matters more than the rest, plug it in. Our explainer on what an Ethernet cable does shows why a cable sidesteps every band, and latency versus bandwidth explains why a speed test alone won't tell you how it feels.

Also check the box before the radio. If you rent a gateway, our post on modem versus router shows which part of it handles Wi-Fi, and whether your plan speed is even close to what a new router could use.

Sources and further reading

  1. 1.PrimaryFCC, "FCC Adopts New Rules for the 6 GHz Band, Unleashing 1,200 Megahertz of Spectrum for Unlicensed Use". April 23, 2020 (FCC 20-51). 5.925 to 7.125 GHz, indoor low power across the full band, 850 MHz of standard power under AFC, and the nearly-fivefold spectrum claim.
  2. 2.PrimaryWi-Fi Alliance, "Wi-Fi Alliance delivers Wi-Fi 6E certification program". January 7, 2021. Certification launch, seven 160 MHz channels, and the WPA3 language.
  3. 3.PrimaryWi-Fi Alliance, "Wi-Fi 6" overview. OFDMA, TWT, MU-MIMO and 1024-QAM descriptions, the statement that Wi-Fi 6 introduced the 6 GHz band, and the Wi-Fi 7 320 MHz comparison.
  4. 4.PrimaryWi-Fi Alliance, "Wi-Fi 6E and 6 GHz Update" (March 2021 slides). Channel counts by band, standards supported in each band, the 3X spectrum claim, and the 9 Gbps rate tied to 160 MHz channels. An industry deck, so its performance claims are advocacy.
  5. 5.DataExcentis, "We tested Wi-Fi 6 versus Wi-Fi 6E: here are the results". A test-house measurement at 8 positions with 160 MHz channels. The page reports coverage only, in a chart, with no throughput figures, and congestion avoidance was not tested.
  6. 6.PrimaryFCC, "FCC Approves Wi-Fi Management Systems to Operate in 6 GHz Band". February 23, 2024. Seven automated frequency coordination systems approved.

Frequently asked questions

What is the difference between Wi-Fi 6 and Wi-Fi 6E?
Wi-Fi 6E is Wi-Fi 6 that also works in the 6 GHz band. Wi-Fi 6 runs in the 2.4 GHz and 5 GHz bands, and 6E adds 1,200 MHz of 6 GHz spectrum that the FCC opened on April 23, 2020. The Wi-Fi Alliance says 6E delivers all the benefits of Wi-Fi 6, plus wider channels, so the gain is more room, not a faster protocol.
Is Wi-Fi 6E faster than Wi-Fi 6?
It can be, but not because the protocol is faster. Both top out at the same Wi-Fi 6 rate of 9 Gbps, which needs 160 MHz channels. The 5 GHz band has only 2 of those channels, and 6 GHz has 7, so 6E is more likely to give you a wide channel that is not crowded.
Does Wi-Fi 6E have better range than Wi-Fi 6?
No, slightly worse. Excentis tested a Wi-Fi 6E access point in a test house and found 6 GHz coverage slightly lower than 5 GHz, because higher frequencies lose more signal over distance. Its conclusion was that the cleaner spectrum outweighs that drawback, and your router still falls back to 5 GHz and 2.4 GHz for devices that are far away.
Do I need a 6E device to use a 6E router?
You need a 6 GHz-capable device to use the 6 GHz band. A 6E router keeps its 2.4 GHz and 5 GHz networks, so older devices still connect, but they never touch the 6 GHz band. In the Excentis test, one of the two client devices could not see the 6 GHz network at all.
Is Wi-Fi 6E worth it in 2026?
Yes if your phone or laptop has a 6 GHz radio, you are near the router, and your 5 GHz band is crowded. If most of your devices are older, a Wi-Fi 6 router gives you the same features and 6E gives those devices nothing. Wi-Fi 7 also uses the 6 GHz band, and the Wi-Fi Alliance says its 320 MHz channels there provide twice the throughput of Wi-Fi 6.

Written by

Tech Talk News Editorial

Computer engineering background. Writes about software, AI, markets, and real estate, and the places where the three meet.

More about the author
ShareXLinkedInRedditEmail